FILTER TESTING WITH SCANAIR PRO SYSTEM

Aerosol Particle Measurement from Lighthouse

FILTER TEST DEIVCES FOR PARTICLE MONITORING

Bakrona offers an extensive range of particle monitoring and filter testing instruments.
to check installed HEPA / ULPA filter and PTFE media filter for leaks. Particle counter based filter testing accessories are equally available as are photometers, particle generators with different concentrations of poly-dispersed aerosols and air flows as well as dilutors with various dilution ratios and low pressure drops. Just a few instruments are mentioned here. Please contact us for more information.

FILTER SCANNING SYSTEM SCANAIR PRO
SMART UPSTREAM SAMPLING AND DOWNSTREAM

ScanAir Pro is an intelligent particle counter based HEPA/ULPA filter test system. The system allows to take an upstream measurement and perform a downstream scanning of filter media in accordance with ISO 14644-3.

ScanAir Pro consists of three components. An ergonomic lightweight scanning wand with onboard color touchscreen display for one-handed operation, a Solair particle counter with 1 cfm and dual-port dilutor. The whole system can be controlled from the touchscreen probe. ScanAir Pro can locate a leak, indicate automatically it's percentage of penetration on the touch screen and print the values on the Solair.

FILTER SCANNING SYSTEM FOR UPSTREAM SAMPLING

FILTER SCANNING PROBE check filters for leak

FILTER SCANNING PROBE SCANAIR – CHECKING FILTERS FOR LEAK TIGHTNESS AND EFFICIENCY

ScanAir is an accessory for SOLAIR particle counter with 1 cfm. The sampling probe facilitates scanning of filters and filter seals to investigate leaks. ScanAir includes 3 meter cable and can be operated one-handed. The built-in Start / Stop button allows to remotely control the particle counter. The on-board alarm buzzer and LED quickly notify, if a count exceeds the alarm threshold, even when used in a high noise environment.

SPECIFICATIONS & VIDEO

Features ScanAir Pro

Complete system to scan & size leaks. Consisting of particle counter, scanning probe and dilutor.
Without particle generator
Ability to challenge test filters with much lower concentrations than with a photometer
Virtually no coalesce of aerosol
Works with particle generators for DEHS and others
Cost-effective method for testing: Particle counter can be used separately for certifying and monitoring cleanrooms
Scanning Probe
- Ergonomic and lightweight with intelligent touchscreen display built-in
- Average upstream challenge concentration measured and stored in memory
- User notification if upstream challenge is insufficient
- Automatic calculation of alarm threshold and filter efficiency (percent leakage penetration)
- Audible warning and visual reference of a leak
- Different scanning speeds
- Adjustable probe head
- Quick Connections
Dilutor
- Powered by the particle counter
- Remotely controlled from the scanning handle for upstream or downstream modus
- Dilutes a high concentration of particles
- Protects the counter’s optics from initial high concentrations of aerosol
- NIST traceable calibration

Features ScanAir

Ergonomic scanning probe
Remote Start/Stop Button
Adjustable scan head
Quick Connections
Remote audible and visual alarm
Includes headphone jack with adjustable volume
Easily integrates with 1 cfm Solair particle counters
Facilitates ISO 14644-3 compliance testing
Ideal for using on ladders, scissor lifts or in hard-to-reach places
Standard 3 meter cable, optional 3 meter extension cable available
Lightweight: 200g in weight

Models

Model	Flow rate	Compatible with following particle counters
ScanAir Pro	28.3 l/min (1 cfm)	Solair* 1100LD, 3100 or 5100
ScanAir	28.3 l/min (1 cfm)	Solair* 1100LD, 3100, 5100
* Generation E and newer

Applications

DOWNLOAD FILTER TESTING BROCHURE

Warning: count(): Parameter must be an array or an object that implements Countable in /home/bakronat/public_html/wp-content/plugins/email-before-download/includes/class-email-before-download-db.php on line 56