THERMOCOUPLES
TYPE T
THERMOCOUPLES FOR THERMAL VALIDATION AND QUALIFICATION
Bakrona supplies thermocouple assemblies, which are optimally suited to your validation tasks: Solid and stranded thermocouple wires which are also available in rolls as well as thermocouples copper / constantan type T with narrow tolerances (special limits, and premium grade). Thermocouples are normally used with different validation systems, such as E-Val Pro or Kaye Validator/Digistrip thermal validation systems.
TEMPERATURE RANGE OF INSULATION
| Insulation type | Application temperature of the thermocouples |
|---|---|
| FEP | -200 °C to 200 °C continuously, 260 °C peak |
| PFA | -200 °C to 260 °C continuously, 300 °C peak |
| Kapton | -200 °C to 260 °C continuously, 350 °C peak |
The thermocouples are available with compensated plugs and panels; standard model up to 205°C and high temperature model up to 425°C.
THERMOCOUPLES WITH FEP INSULATION FOR STEAM STERILISATION
Sealed thermocouple measuring tip for autoclave, CIP, SIP systems, bioreactors, fermenters:
| Type | Specification |
|---|---|
| 7TB30 | Robust 7strands wire, FEP insulated. Old standard version (1.8x3.0 mm) for Kaye Validator and Digistrip |
| 7TB19 | Thinner yet durable 7strands wire, FEP insulated, as a replacement for the mechanically fragile 3strands wire |
| 7TA26 | Autobond 7 strands wire, FEP insulated as alternative to 7TB30. The special cable design prevents the penetration of moisture along the wire |
THERMOCOUPLES WITH KAPTON INSULATION FOR HOT AIR STERILIZATION
Fast responding thermocouple measuring tip with small dimensions for hot air sterilisers and hot air tunnels:
| Type | Specification |
|---|---|
| 7KB23 | Robust 7 strands wire, Kapton insulated, for bottles. Old standard version (1.3x2.3mm) for Kaye Validator and Digistrip |
| 7KB17 | Thin yet robust 7 strands wire, Kapton insulated, for ampoules and vials |
| 7KB15 | Very thin 7 strands wire, Kapton insulated, to measure in small containers |
WHAT THERMOCOUPLES DO YOU NEED?
