THERMOCOUPLES
TYPE T

THERMOCOUPLES
TYPE T

Thermocouples from Bakrona

Contact
 

THERMOCOUPLES FOR THERMAL VALIDATION AND QUALIFICATION

Bakrona supplies thermocouple assemblies, which are optimally suited to your validation tasks: Solid and stranded thermocouple wires which are also available in rolls as well as thermocouples copper / constantan type T with narrow tolerances (special limits, and premium grade). Thermocouples are normally used with different validation systems, such as E-Val Pro or Kaye Validator/Digistrip thermal validation systems.


TEMPERATURE RANGE OF INSULATION

Insulation typeApplication temperature of the thermocouples
FEP-70 to 200 °C continuously, 316 °C peak
PFA-70 to 260 °C continuously, 285 °C peak
Kapton300 °C continuously, 350 °C peak

The thermocouples are available with compensated plugs and panels; standard model up to 205°C and high temperature model up to 425°C.

 
THERMOCOUPLES WITH FEP INSULATION FOR STEAM STERILISATION

THERMOCOUPLES WITH FEP INSULATION FOR STEAM STERILISATION

Sealed thermocouple measuring tip for autoclave, CIP, SIP systems, bioreactors, fermenters:

TypeSpecification
7TB30Robust 7strands wire, FEP insulated. Old standard version (1.8x3.0 mm) for Kaye Validator and Digistrip 
7TB19Thinner yet durable 7strands wire, FEP insulated, as a replacement for the mechanically fragile 3strands wire
7TA26Autobond 7 strands wire, FEP insulated as alternative to 7TB30. The special cable design prevents the penetration of moisture along the wire

THERMOCOUPLES WITH PFA INSULATION FOR FREEZE DRYING

Smallest possible disturbing mass of the thermocouple measuring tip for surface measurements of the cooling plates and measurements in the product:

TypeSpecification
1TB11Very thin 1-strand PFA insulated thermocouples

THERMOCOUPLES WITH PFA INSULATION FOR FREEZE DRYING

THERMOELEMENTE MIT PFA ISOLIERUNG FÜR GEFRIERTROCKNUNG

Kleinstmögliche Masse der Thermoelement Messspitze zur Oberflächenmessung der Kühlplatten und zur Messung im Produkt:

TypSpezifikation
1TB11Sehr dünne 1-Draht Ausführung, PFA isoliert

THERMOCOUPLES WITH KAPTON INSULATION FOR HOT AIR STERILIZATION

THERMOCOUPLES WITH KAPTON INSULATION FOR HOT AIR STERILIZATION

Fast responding thermocouple measuring tip with small dimensions for hot air sterilisers and hot air tunnels:

TypeSpecification
7KB23Robust 7 strands wire, Kapton insulated, for bottles. Old standard version (1.3x2.3mm) for Kaye Validator and Digistrip
7KB17Thin yet robust 7 strands wire, Kapton insulated, for ampoules and vials
7KB15Very thin 7 strands wire, Kapton insulated, to measure in small containers

WHAT THERMOCOUPLES DO YOU NEED?