THERMOCOUPLE FEEDTHROUGHS


Thermocouple feedthroughs are used to insert thermocouples into chambers. The RG feedthrough is used to insert thermocouples into pressurised chambers such as autoclaves. The HD vacuum feedthroughs are used for temperature measurements in vacuum environments, for example in freeze dryers (lyophilisation).



FEEDTHROUGH RG FOR STEAM AUTOCLAVES

Interchangeable thermocouples

Proven RG feedthroughs for thermocouples in steam autoclaves for 12, 16 or 24 thermocouple pairs. Feedthrough connection with TriClover flange. The gentle sealing of the sensor against vacuum and pressure in steam autoclaves is made by silicone flat gaskets. This construction allows individual replacement of single probes.
CONTACT US

FEEDTHROUGH RG FOR STEAM AUTOCLAVES, SIP


VACUUM-TIGHT FEEDTHROUGHS Lyophilisation

VACUUM-TIGHT FEEDTHROUGHS HD

Up to 30 thermocouples simultaneously

For freeze-dryers and other vacuum systems, the high density, mechanically sealed HD feedthrough for thermocouples and copper wires is suitable. The feedthrough can be used for vacuum down to 7x10-6 mbar and is available with 6, 12, 20 or 30 PFA insulated and numbered thermocouple wire pairs or up to 60 copper wires. Feedthrough wire diameter of 0.5 mm.
CONTACT US




Y-ADAPTER FOR STEAM AUTOCLAVES

For two feedthroughs and one pressure transmitter

The MS-Y adapter with TriClover flange for steam autoclaves allows for the connection of two RG feedthroughs and the connection of a pressure reference. Thus, temperature and pressure are simultaneously measured to check the condition of steam in autoclaves.
CONTACT US

Adapter for two feedthroughs and pressure transmitter

DOWNLOAD VALIDATION ACCESSORIES BROCHURE